15. ตุลาคม 2020 - 2:00
Mandarin Hotel Bangkok - Managed by Centre Point
ThailandBangkok662 Rama IV Road, Bangrak, Bangkok, Thailand 10500

Practical Energy Efficiency Improvement and Optimization, Mandarin Hotel Bangkok - Managed by Centre Point, พฤหัสบดี, 15. ตุลาคม 2020

PE21: Practical Energy Efficiency Improvement and Optimization for Process Industries



Process industries are consuming a large amount of energy corresponding to several billion dollars of operating costs per year. Rising fuel and energy costs are a big driver of initiatives and motivation to save and optimize energy consumption. Unfortunately, very few engineers understand essential techniques to systematically reduce energy consumption without compromising process performances. Many plant operators fail to operate the plant at optimum conditions, and choose to operate at a comfortable point that is far from being energy efficient. This course teaches how to identify process improvements for energy efficiency and provide information on practical energy efficiency technologies from equipment level to overall plantwide level based on the instructor’s hands-on practical experience with energy saving in refineries, petrochemical, steam and utility plants, leading to annual cost savings exceeding 100 million baht per year.

==========================



Target Group: All disciplines of engineers and any technical people who deal with process energy efficiency improvements and initiate energy improvement project ideas.

==========================



Date: October 15-16-5 (Thu-Fri), 2020

Time: 9:00-17:00

Price: 19,000 (Early-Bird Rate 17,000, register within September 30, 2020)

Venue: Mandarin Hotel, Samyam, BKK

==========================



Registration: By training registration page in www.chemengedu.com or contact Khun Piyarat +66-(0)-89-118-6531, email: email

==========================



Course Outline:

I. Fundamental Concepts of Energy and Heat

• Mass and enthalpy balances: overall plant and individual equipment

• Industrial energy efficiency concepts



II. Energy Management in Practice

• Energy management practices and technologies

III. Energy Measurements and Monitoring Techniques

• Key Energy Variables

• Specific Energy Consumption

• Energy monitoring: GAP concepts

IV. Techniques to Identify Process Improvements for Energy Efficiency

• Application of specific energy consumption concepts

• Efficiency data plots for effective plant monitoring

• Benchmarking with theoretical or ideal values

V. Economics of Energy Saving Projects

• IRR or DCF

• NPV

• Payback period, simple payout

VI. Energy Efficiency in Furnaces and Boilers

• Key Concepts, Calculations, and Applications

• Furnace Efficiency

• Flue Gas Waste Heat Recovery

• Example Case Studies

VII. Energy Efficiency in Heat Exchangers and Enhanced Heat Transfer

• Key Concepts, Calculations, and Applications

• Heat exchanger fouling and cleaning analysis

• NTU and heat exchanger efficiency concepts

• Enhanced heat transfer technologies

• Example Case Studies

VIII. Energy Efficiency in Steam Turbines

• Key Concepts, Calculations, and Applications

• Example Case Studies

IX. Energy Efficiency in Compressors and Fans

• Key Concepts, Calculations, and Applications

• Compressor flow control

• Polytropic Head and Efficiency

• Example Case Studies

X. Energy Efficiency in Pumps

• Key Concepts, Calculations, and Applications

• Pump flow control and efficiency

• Example Case Studies

XI. Energy Efficiency in Electrical Systems and Equipment (e.g. Motor)

• Motor power factor

• Motor efficiency

• Electrical demand and load management

XII. Energy Efficiency in Utility Systems

• Heat and power systems: gas turbine, steam turbine, Heat Recovery Steam Generator (HRSG)

• Steam systems

o Multi-level steam header balances

o Pricing of steam

o Steam traps and steam leaks

• Hot oil systems

• Refrigeration, chiller, cooling water systems

• Compressed air systems

• Fuel systems

XIII. Energy Efficiency and Optimization Technologies

• Introduction of energy efficiency technologies

• Energy optimization techniques

XIV. Plantwise Energy Consumption and Optimization: Basics of Process Integration and Pinch Analysis that Engineers Should Understand

• Process heat integration concepts

• T-Q curve analysis

• Pinch analysis

• Grand composite curve

==========================



Your Instructor:

Mr. Wiroon Tanthapanichakoon, Senior licensed chemical engineer in Thailand, license no. 155

Qualifications:

• Bachelor and Master degrees in Chemical Engineering from Kyoto University, Japan

• A member of Elsevier Editorial Board in Process and Plant Design (2014-2015) and an advisory board member of International Association of Certified Practicing Engineers (IACPE) (2015-2016)

• A Senior Member of American Institute of Chemical Engineers (AIChE)

• Invited lecturers and instructors for various technical seminars inside and outside Thailand

• One of the first Thai chemical engineers to have published articles in 3 renowned chemical engineering monthly magazines in the US – i.e. Chemical Engineering Progress (by AIChE), Chemical Engineering Magazine, Hydrocarbon Processing

• Holds several papers on Sciencedirect and technology patents

• Presented papers at AIChE 2006 Fall Meeting and was the first engineer of his Thai leading company to present technical knowledge at AIChE 2015 Spring Meeting: Ethylene Producers’ Conference

• Work experience in a technology team of a US licensor, GTC Technology

• >10-year experience in a refinery of a global oil company and an ethylene plant of a leading Thai petrochemical company

• Technology Director and Technical Advisory Board Member of Global R&D Co. Ltd.

• The founder of online chemical & engineering education platform: www.chemengedu.com, www.facebook.com/chemengedu2015

• Provided in-house and public trainings for >100 companies with >1,500 participants proven by 50% participants are the existing customers

พฤหัสบดี, 15. ตุลาคม 2020, Mandarin Hotel Bangkok - Managed by Centre Point, Practical Energy Efficiency Improvement and Optimization

HSMAI 1 Year Membership Subscription - Thai Baht

HSMAI 1 Year Membership Subscription - Thai Baht

ศุกร์ 01. ธันวาคม 2023
Friends in Thailand 2020
อาทิตย์ 01. พฤศจิกายน 2020
Thailand 200Hr Yoga Teacher Training - $2695
พุธ 02. ธันวาคม 2020
Hangover Live
เสาร์ 26. กันยายน 2020
Simply Opening
พฤหัสบดี 22. ตุลาคม 2020
หากิจกรรมที่น่าสนใจอื่น ๆ อีกมากมาย
รับข้อเสนอแนะตามเหตุการณ์ในรสชาติ Facebook ของคุณ รับไปเดี๋ยวนี้เลย!แสดงให้ฉันเห็นเหตุการณ์ที่เหมาะสำหรับผมไม่ใช่ตอนนี้